Minelab Excalibur II Instruction Manual Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 23
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
36 37
No sound
Check that the detector is on. Try turning both
the Threshold and Volume controls to maximum.
Check that the battery pack and power cable
are connected securely.
Check that the battery is charged.
•Try using a different battery pack, available from
your Minelab dealer.
•Check for breaks, cracks or extreme kinks in the
cable assemblies.
Erratic Noises
•Reduce the Sensitivity by turning the control clockwise.
•Check that the battery is properly connected and
fully charged.
•Switch Sensitivity to the Auto position.
•Check for sand or grit between the skid plate and coil.
•Check for overhead power lines and other sources
of electrical interference.
•Check that the controls turn to the correct limits
(marked on the decal). Also check that the ‘clicks’
are present on the Threshold, Disc, Pinpoint/All Metals
and Sensitivity controls.
Troubleshooting Technical
Specifications
Transmission 1.5, 3, 4.5, 6, 7.5, 9 ... 25.5 kHz
Technology BBS - Broad Band Spectrum Technology
Multiple Simultaneous Frequency
Coil (Standard) 8” or 10” Round Double D
Audio Output Koss Headphones supplied - Impedance 8Ω
Length with standard shaft Extended - 1220 mm (48")
Retracted - 1140 mm (45")
Length with diving shaft Extended - 910 mm (36")
Retracted - 820 mm (32")
Weight (including NiMH battery) Including 8" Coil - 2.1 kg (4.6 lbs)
Including 10" Coil - 2.3 kg (5.1 lbs)
Type NiMH Battery Pack 1000 mAh
(Alkaline optional)
Output Voltage 13V when fully charged
Max discharge current is 1A
Capacity when fully charged 14 - 19 hours
Weight 0.3 kg (0.67lbs)
Operating temperature range 0°Cto45°C(32°Fto11F)
Storage temperature range -20°Cto40°C(-Fto104°F)
Battery charge temperature range: 0°Cto45°C(32°Fto11F)
Battery
Detector
Page view 20
1 2 ... 16 17 18 19 20 21 22 23

Comments to this Manuals

No comments