Minelab GPX5000 Instruction Manual download pdf (Page 28)

GPX 5000 Range

GPX 4800 Range

Factory Preset

1–20

Volume Limit

Setting the maximum volume of all sounds.

Volume Limit sets the maximum level of sound emitted by the

detector when a target is detected.

If the Volume Limit is set to maximum all target signals will

be heard, and will sound proportional to the target size and

depth. Maximum limit allows you to hear the difference

between a small and large target, but may be uncomfortable

to your hearing if a large target is found close to the coil.

If the Volume Limit is set to half-way the target signal is

unaffected for a small target but limited for a very large target.

If the Volume Limit is set to minimum most target signals

will potentially be very limited. A low volume will be more

comfortable on your hearing but will increase the risk of

missing small target signals.

Try using a large and small target to adjust the Volume Limit to

a comfortable level.

Note: The Threshold may need to be reset if adjusting the

Volume Limit to a low setting.

Maximum Volume Limit:

Faint and loud signals

are unaffected.

Mid-Range Volume Limit:

Faint signals are unaffected but

loud signals are limited.

Minimum Volume Limit:

Both loud and faint signals are

reduced to quiet levels.

Caution: The detector is able to produce an extremely high

volume if a large or shallow target is located.

Protect your ears!

The Volume Limit may need to be re-adjusted when

switching between headphones and an external speaker.

Volume Limit = 20

Volume Limit = 12

Volume Limit = 1

ThresholdThreshold

Threshold

Volume Limit = 20

Volume Limit = 12

Volume Limit = 1

Threshold

Volume Limit = 20

Volume Limit = 12

Volume Limit = 1

Threshold

ThresholdThreshold

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 50 51

Comments to this Manuals

No comments

Minelab GPX5000 Instruction Manual Page 28

Comments to this Manuals

Related products and manuals for Measuring, testing & control Minelab GPX5000