Minelab GPX5000 Instruction Manual download pdf (Page 9)

14 15Assembly

Continued...

Fitting the Battery Harness:

1 Thread your arms through the harness,

so the battery pack sits on your back.

2 Clip the waist and chest buckles together.

For more detail see Adjusting the Detector for

Comfortable Detecting (p. 16).

Attaching the Bungy Cord:

1 Create a loop in the bungy cord.

2 Undo the plastic wingnut and remove the bolt from

the clamp.

3 Push the bolt back through the clamp and loop to

secure the bungy cord to the shaft.

4 Fasten the screw with the wingnut.

5 Clip the bungy cord onto one of the harness

shoulder strap rings.

For more detail see Adjusting the Detector for

Comfortable Detecting (p. 16).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 50 51

Comments to this Manuals

No comments