Minelab Excalibur II Instruction Manual download pdf (Page 26)

Page 26 The Minelab Excalibur Family

• Always keep the spare battery pod above the water’s surface.

Your spare battery pod is not designed to be carried under water. If it is

submerged in salt water while disconnected, the battery will discharge and

the contacts will corrode.

Trouble-shooting Guide

Fault Solution

No Sound Check battery is charged

Ensure battery pod is connected

Ensure unit is turned “On”

Erratic Noises Check battery charge and battery connections

Reduce the sensitivity by turning clockwise

Switch to the “Auto” position

Check for sand or grit between coil cover and coil

Check for overhead power lines and other sources

of electrical interference

No Target Response Ensure unit is turned “On”

Check battery charge and battery connections

In the unfortunate circumstance that you need to return your detector to

Minelab for service, please fill out the Service Repair Form on page 28 and

enclose it with the detector. Please supply as much detail as possible as this

will assist our service engineers to rectify the fault quickly and efficiently.

1 2 ... 21 22 23 24 25 26 27 28 29

No comments

Minelab Excalibur II Instruction Manual Page 26