THE MINELAB ‘GP extreme’
22
CONTROLS
4
www.minelab.com
Tone
Figure 4.15
Adjusts the tone of the threshold. The user may set this to the
preferred tone, e.g. the tone at which the operator
’s hearing is
most sensitive.
At minimum position, threshold is set at a low tone. Turning
clockwise increases the tone to higher pitch.
Signal Pitch
Figure 4.12
Adjusts the pitch response of the target signal.
In Figures 4.13 and 4.14 the curving line represents the high/low
pitch response to a target. The dotted line represents the
threshold tone.
• At minimum position the high/low pitch variance to a target is
reduced.
• At maximum position the high/low pitch variance to a target is
increased.
CONTROL FUNCTIONS
Figure 4.12 Signal control
Audio
Figure 4.13 Reduced pitch variance
Figure 4.14 Increased pitch variance
P0522-A
P0510-A
P0510-B
Audio
Figure 4.15 Tone control
P0523-A
THE MINELAB ‘GP extreme’
23
4
CONTROLS
Front Panel
Figure 4.16
Figure 4.16 Rear Panel
CONTROL FUNCTIONS
P0510-A
Tune
Figure 4.17
Reduces the effects of electromagnetic interference from sources
such as power lines, radio transmitters and other metal
detectors.
Automatic tuning is started by pressing and releasing the Tune switch.
The tuning process takes approx. 60 sec. and completion is
indicated by three sharp
‘beeps’.
Figure 4.17 Tune control
P0524-A
Comments to this Manuals