Minelab X-Terra 705 Instruction Manual download pdf (Page 14)

The Preset Discrimination Patterns may be

edited to create custom patterns.

Method 1 – to reject a specic

Target ID using an actual target

When a target is detected a discrimination

segment will ash, indicating its position on

the discrimination scale, and the target’s ID

number will appear on the LCD.

Press Accept/Reject

to reject that

Target ID.

The discrimination segment and

icon will

appear to indicate that the detected ID is now

rejected.

Check that the Target ID has been rejected

by detecting again. There should be no audio

response (blanking) from that target

(Detector Audio, p. 17).

Method 2 – to reject a specic

Target ID using + or –

Use + and – to scroll through and select the

Target ID you want to modify. The ashing

segment and the Target ID number will

indicate the selected ID.

Press Accept/Reject

to either accept or

reject that ID. The discriminated segment and

the

icon will appear if rejected. The segment

and the

icon will disappear if accepted.

Accept/Reject toggles between

accepting and rejecting targets.

All Metal Shortcut

The X-Terra 705 has

an All Metal shortcut

available in both modes.

In Coin & Treasure Mode,

press All Metal

to

toggle between the

selected Pattern and

All Metal.

Pattern

Discrimination

In Coin & Treasure Mode

use Patterns

to

toggle between

Pattern 1, Pattern 2,

Pattern 3 and Pattern 4.

Iron Mask

Discrimination

In Prospecting Mode

use

+ and – to

adjust the Iron Mask

Discrimination scale.

The All Metal Pattern

cannot be edited.

In Prospecting Mode,

press All Metal

to

toggle between Iron

Mask and All Metal.

When the Iron Mask Level is set to 0,

the detector behaves the same as in

All Metal Pattern.

25

editing a discrimination pattern

24

choosing a discrimination pattern

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 30 31

Comments to this Manuals

No comments