Minelab EXPLORER II Service Manual Page 49
- Page / 112
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
THE MINELAB EXPLORER II
43
QUICKSTART
5
THE IRON MASK
THE IRON MASK
Adjusting the Iron Mask
Figure 5.5
Pressing the IRON MASK shortcut button on the control panel will
display the Iron Mask adjustment screen.
Preset Level
The Explorer II's Iron Mask is set at a rating of -6. This is suitable
when detecting non-ferrous metals.
Detecting more ferrous objects
If you want target responses from more ferrous objects (e.g. war
relics) it is necessary to reduce the level of ferrous rejection. This
is done by pressing the bottom left shift button next to the slider
control, reducing the extent of the Iron Mask. You may need to
experiment a little with the settings.
Detecting all ferrous objects
If you wanted to detect all objects, regardless of ferrous content,
ferrous rejection can be reduced to a minimum level of -16. The
screen will be completely clear and all objects will sound a target
response.
Rejecting all ferrous objects
If you want target responses to be suppressed for all ferrous
objects, the Iron Mask may be increased to a level of 0. This is
represented by the mask extending to half way across the
Smartfind screen (as depicted in the section explaining
two-dimensional discrimination, see page 42).
Figure 5.5 Adjusting the Iron Mask
The Iron Mask shortcut button on
the control panel allows you to
switch between Iron Mask and
Discrimination.
Before you experiment with this,
an understanding of the features
of these functions will greatly
assist in deciding which will
locate the kind of targets you
want and how to adjust the
Explorer II to suit your
preferences.
The tutorials featured later in this
chapter also assume a basic
understanding of Iron Mask and
Discrimination functions.
Iron Mask Shortcut
- Minelab Explorer II 1
- TABLE OF CONTENTS 3
- Introduction 7
- ABOUT THIS MANUAL 8
- Contact Minelab 9
- MINELAB’S UNIQUE TECHNOLOGY 10
- Getting Lost? 11
- Discrimination 12
- Operating Frequencies 13
- THE MINELAB EXPLORER II 14
- Assembly 15
- ASSEMBLING THE DETECTOR 16
- CONNECTING THE SEARCH COIL 17
- THE SHAFT ASSEMBLY 19
- CONNECTING THE SHAFT ASSEMBLY 20
- Coil not connected? 21
- THE HANDLE ASSEMBLY 22
- Headphone 24
- Pull Coil Cable 26
- Batteries 27
- THE BATTERY PACK 28
- Safety Tip 29
- Recharging 29
- BATTERY PERFORMANCE 31
- Battery Life 31
- More detecting time? 31
- Battery Performance 31
- Control Panel 33
- THE CONTROL PANEL 34
- BACKLIGHT 35
- MENU AND BACK BUTTONS 36
- SHORTCUT BUTTONS 37
- Iron Mask 38
- Pinpoint 38
- SHIFT BUTTONS 39
- Quickstart 41
- GETTING STARTED 42
- Display memory 42
- INCORRECT 43
- QUICKSTART DISPLAY 44
- QUICKSTART’S SMARTFIND 46
- THE IRON MASK 49
- Iron Mask Shortcut 49
- Operating in Iron Mask 50
- Figure 5.6 50
- QUICKSTART’S DIGITAL DISPLAY 51
- Preferred Display 51
- MODIFYING THE DISPLAY 52
- ADJUSTING SENSITIVITY 53
- Noise Cancel 53
- ADJUSTING THRESHOLD 54
- Display Icon 54
- AUDIO RESPONSE 55
- Headphones Caution! 55
- AUDIO MENU 56
- Headphones 56
- AUDIO: ADJUSTING THE VOLUME 57
- Figure 5.16, 5.17 58
- AUDIO: ADJUSTING THE TONE 59
- AUDIO: ADJUSTING THE SOUNDS 60
- PINPOINTING THE OBJECT 63
- Using Pinpoint 64
- Figure 5.21 64
- RECOVERING THE OBJECT 65
- Fill your holes! 65
- SELECTING TARGETS 66
- ADVANCED MODE OPTION 69
- Advanced Use 71
- ADVANCED MODE’S MAIN MENU 72
- STARTING IN ADVANCED MODE 73
- Are you ready? 73
- ADVANCED MODE’S DISPLAYS 74
- ADVANCED MODE’S LEARN DISPLAY 75
- LEARNING TARGETS 76
- Silence please! 76
- LEARN’S TARGET SELECTION 77
- ADVANCED MODE’S EDIT DISPLAY 79
- EDITING PATTERNS 80
- Continued next page 81
- EDITING AND SAVING TARGETS 82
- ADVANCED MODE’S SELECT MENU 83
- SAVING TARGETS 84
- Saving Shortcut 84
- Volume Shortcut 85
- OPTIONS MENU 86
- OPTIONS: NOISE 87
- Noise Shortcut 87
- OPTIONS: RESPONSE 88
- OPTIONS : RESPONSE 89
- OPTIONS: RECOVERY 90
- SETTINGS MENU 91
- Get into the habit 92
- User Info 93
- HELPFUL HINTS 94
- Leading Alkaline 96
- USER PREFERENCES 97
- QUICKSTART MENU STRUCTURE 100
- ADVANCED MENU STRUCTURE 101
- TROUBLESHOOTING 102
- SERVICE REPAIR FORM 103
- WARRANTY 105
- EXPLOPLORER II 106
- EXPLORER II MODEL 107
- GLOSSARY OF TERMS 108
- DETECTOR CARE AND SAFETY 112
Related products and manuals for Measuring, testing & control Minelab EXPLORER II
(25 pages)
(94 pages)
(11 pages)© 2020, manymanuals.com. All rights reserved. | 0.358 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals