Minelab F3 Service Manual download pdf (Page 33)

F3 Field Service Manual

Page 33

3004-0011 CAMLOCK KIT LOWER SHAFT F3

1 8007-0022 CAMLOCK BODY LOWER F3

2 8008-0031 PRESSURE BLOCK LOWER F3

3 8008-0030 WEAR PLATE F3

4 8008-0029 CAM LEVER LOWER CAMLOCK F3

5 4308-0008 PIN LOWER CAMLOCK F3

Figure 45: Lower Camlock Assembly

b. To disassemble the middle camlock and shaft:

● Using Figure 46 as a guide, use the 3mm T handle hex driver to push out the cam

lever pivot pin (Part 5) from the middle camlock body (Part 1).

● Remove the cam lever.

● Remove the pressure block by pushing it out from inside the shaft.

● Remove the middle shaft by pushing it back through the upper shaft.

3004-0012 CAMLOCK KIT MIDDLE SHAFT F3

1 8008-0023 CAMLOCK BODY MIDDLE F3

Lower Shaft

er Shaft

Middle Camlock Assembl

Middle Shaft

er Shaft

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 41 42

No comments

Minelab F3 Service Manual Page 33